DuctlessAire 21 SEER 27 000 BTU 2.25 Ton 3-Zone Ductless Mini Split Air Conditioner with Heat Pump - 230-Volt60Hz DA27-9-9-9

The 27，000 BTU 3-Zone 21 SEER DuctlessAire mini split air conditioner with variable-speed DC inverter compressor provides an ultra-efficient， quiet， low-cost professional solution for your cooling and heating needs without requiring any duct work. Complete with 3 x 9，000 BTU indoor units with up to 1，050 sq. ft. of coverage combined， this energy-efficient system is the ideal solution for open-room applications such as classrooms， sun rooms， open floor plan flexible-use spaces， man caves， home theaters， offices， studios， bedrooms， bonus rooms over the garage and even basements and garages where heating and cooling is desired. Where there is an open interior space need for heating and cooling， DuctlessAire mini splits have the answer. This sleek-looking unit is mounted on the wall， working in concert with an exterior condenser requiring only a small hole to run the lines from the air handler to the condenser. The fans deliver continuous airflow and circulation with year-round temperature comfort and are easily adjusted with a remote control or your phone using the Wi-Fi module that comes standard with each unit. Because the air handler is mounted above eye level， it is aesthetically attractive， blends well and does little to impede with furniture and decor placement. DuctlessAire mini splits are a cost-effective alternative to central HVAC systems and can be installed in just a few hours. Equipment should be sized/installed by a qualified professional.

Energy-efficient 21 SEER 27000 BTU

Wi-Fi module included

Equipment should be sized/installed by a qualified professional

Complete system: 3 x 9，000 BTU wall-mount indoor unit; pre-charged outdoor unit; wireless remote control; 3 x 25 ft. kits include pre-flared copper tubing with insulation and nuts， 3 x 25 ft. control wire， 6 ft. drain hose， wall sleeve， sleeve cover and tape

Wi-Fi module included， ultra-quiet， auto clean， auto restart， turbo mode， low ambient heating and cooling， refrigerant leak detection， dual sensor， electroplated coils， washable HEPA filter， built-in electronic diagnostic， outdoor pan heater， anti-cold draft

Low ambient operation: a special built-in low ambient kit can be used in temperatures as low as 5°F for heating operation， and 32°F for cooling， useful for users who need to maintain cooling during winter

Louver position memory: the set louver position is stored in memory by the microcomputer and the louver returns to the stored position when the next operation is performed

Unique electroplated hydrophilic coils help improve heating efficiency by accelerating the defrosting process， also aids in withstanding the effects of salty air， rain and other corrosive elements by allowing water on the coils to run off more quickly

HEPA filter included (1): A HEPA filter is a type of mechanical air filter; it works by forcing air through a fine mesh that traps harmful particles such as pollen， pet dander， dust mites and tobacco smoke

2-direction air vane technology: in cooling mode the air vane opens counterclockwise to direct air horizontally， allowing for an even cooling effect; in heating mode the air vane opens clockwise， directing air downward for a uniform heating effect

Self-cleaning: by pressing clean on the remote control， it automatically cleans the evaporator to aid in reducing buildup of bacteria and keeps the air fresh

Sleep mode: in sleep mode， the unit automatically decreases the heating or increases the cooling by 1° per hour for the first 2-hours of use， then holds the temperature steady for 5-hours before ceasing

Low noise airflow system: without decreasing the airflow volume and capacity output， the large-diameter cross flow fan can bring down the indoor unit noise level by lowering the fan speed

Anti-cold draft: if the unit is turned on in heat mode when the ambient temperature is low， it will warm up prior to fan operation to prevent cold air in heating mode

"Find out more about installation: