Cen-Tec 20 Gal. Trantor Industrial 2-Motor Canister Vacuum with Filter Shaker and 25 ft. High Reach Attachment Package 95105

The Trantor industrial vacuum was designed for challenging applications and work environments like those found on construction sites or for post construction clean-up. The 2 bypass motors generate 250 CFM and 94. 5 in. of water lift ideal for capturing large and fine debris and particulate which is first filtered cyclonically and then through a durable polyester cartridge filter with large surface area insuring clean air discharge. A galvanized cone overlaps a cast metal tangential entry point which enhances the cyclonic effect for separation of heavy debris helping to protect and preserve the life of the polyester cartridge filter. To insure airflow is maintained， the Trantor is equipped with a filter shaker that helps to clean the surface of the cartridge filter during and after the vacuum is in operation. In applications where a power tool might be needed an 800-Watt grounded plug is mounted on the control panel of the vacuum. The plug is connected in such a way as to permit the vacuum to turn on when the power tool is powered allowing for source capture of debris when equipped for this purpose. The heavy-gauge 20 Gal. capacity stainless steel recovery bin is mounted on a steel trolley with heavy-duty casters to improve mobility in application where uneven surfaces or exterior use demands. The 93125 system is designed for easy cleaning of elevated surfaces up to 24 ft. from the floor.

Vacuum features two 2-stage bypass motors generating 250 in. and 94-1/2 in. of water lift

Includes a 20 Gal. heavy-gauge stainless steel recovery bin with tangential entry and cyclonic separation in front of the durable polyester cartridge filter

Operates at 68 dBA measured 10 ft. from the operating vacuum

Has a cast metal tangential entry point with spring loaded quick connection of the hose， the entry point is covered by a galvanized cyclonic cone that helps to create the cyclonic action necessary for separation of debris from the air stream helping to protect the polyester cartridge filter from direct exposure to all but the finest debris in the air stream

Features an 800 w plug on the control panel for operation of power tools， the vacuum is activated through the power tool switch or with a 2-position switch on the control panel

Equipped with a filter shaker to clean the surface of the cartridge filter of fine particulate during or after operation preserving airflow and extending the life of the cartridge filter

System designed for cleaning elevated surfaces safely from the floor or platform up to 24 ft. without the use of ladders that expose the user to risk of a fall

System includes 3 light weight aluminum telescopic wand as well as 3 adaptor wands with compression collars to secure accessories for cleaning pipes， horizontal and vertical surfaces both elevated or on the floor

Each section of the system is designed to lock in place for safe cleaning overhead or when extending horizontally from an elevated platform， at less than 6 lbs. equipped with the tool of choice it is easily controlled in use

3 brush tools included have a curved surface designed to engage the surface of ventilation duct or other similar round surfaces from 6 in. Dia all the way up to 5 ft. Dia

Shop other to find the best option for your home!